RF Tools

Coax cable loss calculator

Every metre of feed line costs signal, and more of it at higher frequencies. Loss is usually quoted in dB per 100 ft at a given frequency.

CALC.14 Coaxial Cable Loss RUN LENGTH × ATTN

Total cable + connector loss for a Tx feed. Pick a common cable type to autofill attenuation per 100 ft at the typical band centers; or enter your own.

dB/100ft
dB
TOTAL FEED LOSS — dB cable —, connectors —

Manufacturer datasheets are the authoritative source. Values shown are typical at 25 °C and tend to increase with temperature and age.

The formula

Loss (dB) = attenuation (dB/100 ft) × length (ft) / 100 + connector losses

Worked example

150 ft of LMR-400 at 1900 MHz (5.7 dB/100 ft) loses about 8.6 dB before connectors: more than 85% of the power. Use the manufacturer's datasheet for exact figures.

Related calculators

Runs entirely in your browser; nothing you type is sent anywhere. For compliance work, always check the regulator's own text.