CommScope

FFV4-65B-R3-V1

12-port 65° panel, 4x 617–894 + 8x 1695–2690, 3x RET.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Public datasheet summary. The specifications on this page are taken from CommScope’s publicly available datasheet, linked above. CommScope owns its name, trademarks and specifications, which may change without notice. This site is not affiliated with, endorsed by, or sponsored by CommScope, and nothing here is proprietary to this site. Values are provided as-is for reference only — the manufacturer’s current datasheet is the authoritative source.

Inter-band isolation is 28 dB (cross-polar 25 dB); most FFV4 models publish 25 dB inter-band. Port mapping from the p.2 Array Layout: low arrays R1/R2 617–894 on ports 1–4, high arrays Y1–Y4 1695–2690 on ports 5–12.

SPEC.COVCoverage7 band rows
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
617–698MHz 1-4 14.4dBi 61° 14.6° 2–14° -150dBc 250W 20dB
698–894MHz 1-4 14.7dBi 59° 12.4° 2–14° -153dBc 250W 20dB
1695–1880MHz 5-12 17.6dBi 63° 5.6° 2–12° -153dBc 200W 20dB
1850–1990MHz 5-12 18dBi 61° 5.3° 2–12° -153dBc 200W 19dB
1920–2200MHz 5-12 18.4dBi 61° 5.1° 2–12° -153dBc 200W 20dB
2300–2500MHz 5-12 18.4dBi 59° 4.5° 2–12° -153dBc 200W 20dB
2500–2690MHz 5-12 19dBi 59° 4.1° 2–12° -153dBc 200W 19dB
SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
900W total900 W total at 50 °C. Per-port figures are the datasheet's ratings at 50 °C.
Impedance
50Ω
Isolation
25 cross-polar, 28 inter-band
SPEC.MECMechanical
Dimensions
640 x 235 x 1828mm
Weight
49kgwithout mounting kit
Wind load
765.0 N at 150 km/h
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female, bottom
Port count
12
Mounting
BSAMNT-4
SPEC.PRTPorts12 total
  • Ports 1-4 617–894MHz
  • Ports 5-12 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4617–894MHz
  • Ports 5–121695–2690MHz
SPEC.PATRadiation patterns7 bands
0°90°180°270°HBW 61°
Horizontal — 617–698MHz
0°90°180°270°VBW 14.6°tilt 2–14°, shown at 8°
Vertical — 617–698MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-20: https://pt.andrew.com/globalassets/digizuite/262495-p360-ffv4-65b-r3-v1-comprehensiveexternal.pdf
Datasheet revision
Revised March 12, 2025
Added

Specifications belong to CommScope and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary. This site is not affiliated with, endorsed by, or sponsored by CommScope. If you represent CommScope and want a correction or removal, use “Report an error” below.

Report an error in these specs

Upload a newer datasheet revision