CommScopeAntenna · Panel
FVV-65A-R3
6-port 65° panel, 2x 617–894 + 4x 1695–2690, 3x RET.
600700850AWSPCSWCSBRS
- Peak gain
- 17.8 dBi
- Ports
- 6
- Size
- 300 x 181 x 1413 mm
Verified
CommScope
FVV-65C-R3
6-port 65° panel, 2x 617–894 + 4x 1695–2690, 3x RET.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port |
|---|---|---|---|---|---|---|---|
| 617–698MHz | 1-2 | 15.4dBi | 71° | 10.3° | 2–12° | -150dBc | 250W |
| 698–894MHz | 1-2 | 15.8dBi | 69° | 8.7° | 2–12° | -150dBc | 250W |
| 1695–1880MHz | 3-6 | 17.5dBi | 66° | 5.6° | 2–12° | -150dBc | 200W |
| 1850–1990MHz | 3-6 | 18.1dBi | 66° | 5.3° | 2–12° | -150dBc | 200W |
| 1920–2200MHz | 3-6 | 18.6dBi | 65° | 4.9° | 2–12° | -150dBc | 200W |
| 2300–2500MHz | 3-6 | 19.1dBi | 61° | 4.4° | 2–12° | -150dBc | 200W |
| 2500–2690MHz | 3-6 | 19.2dBi | 57° | 4.1° | 2–12° | -150dBc | 200W |
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- 900W total900 W total at 50 °C. Per-port figures are the datasheet's ratings at 50 °C.
- Impedance
- 50Ω
- Isolation
- 25 cross-polar, 28 inter-band
SPEC.MECMechanical
- Dimensions
- 301 x 181 x 2451mm
- Weight
- 24.4kgwithout mounting kit
- Wind load
- 396.0 N at 150 km/h
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 6x 4.3-10 female, bottom
- Port count
- 6
- Mounting
- BSAMNT-3
SPEC.PRTPorts
- Ports 1-2 617–894MHz
- Ports 3-6 1695–2690MHz
- Ports 1–2617–894MHz
- Ports 3–61695–2690MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: https://zh.andrew.com/globalassets/digizuite/262517-p360-fvv-65c-r3-external.pdf
- Datasheet revision
- Revised March 12, 2025
- Added
Specifications belong to CommScope and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare