NNV4SSP-360S-F2
18-port small-cell canister, 360° pattern, fixed tilt.
- Peak gain
- 9 dBi
- Ports
- 18
- Size
- 610 x Ø370 mm
CommScope
14-port quasi-omni small-cell canister, 4x 698–896 + 4x 1695–2690 + 4x 3400–3900 + 2x 5150–5925, 360° HBW, fixed and manual tilt.
Display units
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Public datasheet summary. The specifications on this page are taken from CommScope’s publicly available datasheet, linked above. CommScope owns its name, trademarks and specifications, which may change without notice. This site is not affiliated with, endorsed by, or sponsored by CommScope, and nothing here is proprietary to this site. Values are provided as-is for reference only — the manufacturer’s current datasheet is the authoritative source.
Quasi-omni: 360° HBW on every band. The datasheet publishes no Front-to-Back or USLS rows, so fb_db and usls_db are null on all bands; the PIM row has values only under the first five sub-bands (−153/−153/−153/−153/−150 dBc), so pim_dbc is null on 3400–3900 and 5150–5925. No Total Input Power line, so max_power fields are null. The 5 GHz Port Power Table (FCC Title 47 Part 15) limits max input per port to 0.5 W (U-NII 1, 5150–5250), 0.125 W (U-NII 2A, 5250–5350), 0.125 W (U-NII 2C, 5470–5725) and 0.5 W (U-NII 3, 5725–5850) — below the 5 W per-port rating in the electrical table; bands[] keeps the 5 W rating. Port mapping from the p.1 connector-plate photo: R1 low ports 1–4, Y1/Y2 mid ports 5–8, P1/P2 C-band ports 9–12, O1 5 GHz ports 13–14. The Port Configuration diagrams describe 4T4R use of ports 1–4 and 2T2R use of ports 1 & 4 (ports 2 & 3 equivalent) of the pattern-diversity antenna. No mounting kit is listed in the datasheet, so mounting is null. Mid band (1695–2690) has manual tilt 5–15°; low, C-band and 5 GHz bands are fixed at 0°.
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port |
|---|---|---|---|---|---|---|---|
| 698–806MHz | 1-4 | 5.1dBi | 360° | 62.3° | 0° fixed | -153dBc | 75W |
| 806–896MHz | 1-4 | 5.1dBi | 360° | 55.1° | 0° fixed | -153dBc | 75W |
| 1695–1920MHz | 5-8 | 7.1dBi | 360° | 19.2° | 5–15° | -153dBc | 75W |
| 1920–2180MHz | 5-8 | 7.8dBi | 360° | 16.9° | 5–15° | -153dBc | 75W |
| 2300–2690MHz | 5-8 | 8.3dBi | 360° | 14.3° | 5–15° | -150dBc | 75W |
| 3400–3900MHz | 9-12 | 7.4dBi | 360° | 32.7° | 0° fixed | Not published | 35W |
| 5150–5925MHz | 13-14 | 4dBi | 360° | 20.9° | 0° fixed | Not published | 5W |
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF. For omnidirectional bands the vertical cut is the donut cross-section: peak at the horizon, nulls overhead and below.
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
Specifications belong to CommScope and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary. This site is not affiliated with, endorsed by, or sponsored by CommScope. If you represent CommScope and want a correction or removal, use “Report an error” below.