JMA Wireless

XGU-FRO-124

4-port dual-band FRO stadium antenna, 698-960/1695-2700 MHz, 24° HBW.

Antenna · Panel Small cell Verified from manufacturer datasheet
Manufacturer PDF Product page

Base model has 4 DIN connectors (2 for the diplexed -I variant). PDF footer misprints the model as 'XGE-FRO-124'. VSWR varies by column (1.7 on 698-745, 897-960, 2181-2360, 2496-2700; 1.5 elsewhere); record vswr is the worst case 1.7. HBW/VBW swap if installed upright (PDF footnote). Azimuth sidelobe suppression is >18 dB on all bands; it is not a USLS value and is not recorded as usls_db. Ports are the antenna's 4 DIN connectors; the PDF does not map ports to bands.

SPEC.COVCoverage6 band rows
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
698–745MHz 1-4 11.4dBi 26° 55° 0° fixed -153dBc 250W
746–896MHz 1-4 11.2dBi 24° 49° 0° fixed -153dBc 250W
897–960MHz 1-4 11.1dBi 22° 48° 0° fixed -153dBc 250W
1695–2180MHz 1-4 12.3dBi 26° 64° 0° fixed -153dBc 125W
2181–2360MHz 1-4 12.5dBi 23° 52° 0° fixed -153dBc 125W
2496–2700MHz 1-4 13dBi 20° 50° 0° fixed -153dBc 125W
SPEC.ELEElectrical
Polarization
±45°
VSWR
1.7: 1
PIM, 3rd order
-153dBc
Max input power
By band, see Coverage250 W per connector low band, 125 W high band.
Impedance
50Ω
Isolation
25 dB (min.)
SPEC.MECMechanical
Dimensions
375 x 915 x 203mm
Weight
8.2kg5.0 lb (2.3 kg) bracket
Wind load
404 N frontal at 100 mph
Max wind speed
193 km/h (120 mph)
Connectors
4x 7-16 DIN female, back
Port count
4
Mounting
Stadium bracket kit 919050 included
SPEC.PRTPorts4 total
  • Ports 1-4 698–2700MHz
1+2−3+4−
Illustrative port layout — drawn from the published 4 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4698–2700MHz
SPEC.PATRadiation patterns6 bands
0°90°180°270°HBW 26°
Horizontal — 698–745MHz
0°90°180°270°VBW 55°tilt 0°
Vertical — 698–745MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://www.jmawireless.com/images/uploads/pdfs/XGU-FRO-124_DataSheet.pdf
Datasheet revision
v.3, August 2, 2018
Added

Specifications belong to JMA Wireless and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision