Amphenol

7834400

2-port MicroCell in-building panel, MIMO, ±45°, 695–2700 MHz.

Antenna · Panel Small cell Verified from manufacturer datasheet
Manufacturer PDF

Source is the manufacturer In-Building catalogue (Amphenol-In-Building-Antennas.pdf), not a standalone datasheet. 2-port MicroCell in-building panel, not a macro panel. Gains are the catalogue's nominal ± 1.0 dBi figures. HBW 75° ± 15° is the catalogue's single merged-cell figure covering 695–960 MHz (applied to both low bands); isolation >20 dB and VSWR ≤ 2.0 likewise cover 695–960, >23 dB and ≤ 1.5 cover 1710–2700. No USLS or tilt published. PIM ≤ -150 dBc. Radome ABS, white RAL9003. The amphenol.com search index shows a 7834400AM datasheet titled DISCONTINUED, but that PDF is no longer hosted (404) and the current catalogue still lists 7834400, so EOL is unconfirmed.

SPEC.COVCoverage3 band rows
600700850AWSPCSWCSBRS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc
695–806MHz 1-2 5dBi 75° 68° Not published -150dBc
806–960MHz 1-2 6dBi 75° 60° Not published -150dBc
1710–2700MHz 1-2 7dBi 65° 65° Not published -150dBc
SPEC.ELEElectrical
Polarization
±45°
VSWR
Not published
PIM, 3rd order
By band, see Coverage
Max input power
50W total50 W total per the In-Building catalogue; no per-port figure published.
Impedance
50Ω
Isolation
>20 dB (695–960 MHz), >23 dB (1710–2700 MHz)
SPEC.MECMechanical
Dimensions
308 x 190 x 65mm
Weight
0.9kg
Wind load
Not published
Connectors
2x 4.3-10 female or N-type female
Port count
2
Mounting
Not published
SPEC.PRTPorts2 total
  • Ports 1-2 695–2700MHz
1+2−
Illustrative port layout — drawn from the published 2 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–2695–2700MHz
SPEC.PATRadiation patterns3 bands
0°90°180°270°HBW 75°
Horizontal — 695–806MHz
0°90°180°270°VBW 68°
Vertical — 695–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All Amphenol models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://amphenol-antennas.com/datasheets/Amphenol-In-Building-Antennas.pdf
Datasheet revision
Not published
Added

Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision