APXVAALL18M-U-J20
8-port 65° panel, 2x 617–894 + 2x 1695–2690, integrated RET (ACU-X20-N2), 1823 mm.
- Peak gain
- 19.6 dBi
- Ports
- 8
- Size
- 1823 x 499 x 215 mm
Amphenol
8-port 65° panel, 2x 617–894 + 2x 1695–2690, integrated RET (ACU-X20-N2), 2432 mm.
Display units
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
F/B is the Total Power ±30° figure; F/B at 180° copolar is 28/25/30 dB (617–894) and 30/31/31/29 dB (1695–2690). USLS is the Peak to +20° figure; First Upper Side Lobe is 15/17/19 dB (617–894) and 15/17/16/15 dB (1695–2690). Gains and beamwidths are the datasheet's nominal values (tolerances given per column). RET: integrated ACU-X20-N2, 1 actuator, AISG v2.0/3GPP, tilt 2–12° both bands. Radome light grey RAL7035 ASA; direct ground lightning protection. Note the third high-band sub-band is 1995–2200 MHz (not 1920–2200 as on the 18 m model).
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 617–698MHz | 1-4 | 15.8dBiavg 15.2 | 70° | 9.8° | 2–12° | -153dBc | 300W | 15dB |
| 698–806MHz | 1-4 | 16.4dBiavg 16 | 60° | 9.1° | 2–12° | -153dBc | 300W | 17dB |
| 806–894MHz | 1-4 | 16.8dBiavg 16.2 | 57° | 8.1° | 2–12° | -153dBc | 300W | 19dB |
| 1695–1880MHz | 5-8 | 18.1dBiavg 17.5 | 62° | 5.5° | 2–12° | -153dBc | 250W | 15dB |
| 1850–1990MHz | 5-8 | 18.7dBiavg 18.1 | 61° | 5.1° | 2–12° | -153dBc | 250W | 16dB |
| 1995–2200MHz | 5-8 | 19dBiavg 18.4 | 61° | 4.8° | 2–12° | -153dBc | 250W | 15dB |
| 2200–2690MHz | 5-8 | 19.6dBiavg 18.8 | 53° | 4° | 2–12° | -153dBc | 250W | 14dB |
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.