CCIAntenna · Panel
HPA65R-KE8A
Eight-foot (2.4 m), tri-band, six-port panel, 65° azimuth beamwidth, 694–960 and 1695–2690 MHz.
600700850AWSPCSWCSBRS
- Peak gain
- 18.3 dBi
- Ports
- 6
- Size
- 2437 x 297 x 196 mm
Verified
CCI
HPA33R-TE6C
Six-foot (1.8 m), tri-band, six-port panel, 33° azimuth beamwidth, 614–960 and 1695–2690 MHz.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part HPA33R-TE6CA-K.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 614–698MHz | 1-2 | 16.6dBiavg 15.8 | 35° | 15° | 2–12° | -153dBc | 500W | 13.1dB |
| 698–806MHz | 1-2 | 17.2dBiavg 16.7 | 33° | 13.1° | 2–12° | -153dBc | 500W | 18.5dB |
| 790–862MHz | 1-2 | 17.7dBiavg 17.1 | 33° | 11.9° | 2–12° | -153dBc | 500W | 17.7dB |
| 824–896MHz | 1-2 | 18dBiavg 17.4 | 31° | 11.3° | 2–12° | -153dBc | 500W | 16.5dB |
| 880–960MHz | 1-2 | 18.1dBiavg 17.6 | 30° | 10.6° | 2–12° | -153dBc | 500W | 15.9dB |
| 1695–1880MHz | 3-6 | 19.7dBiavg 18.6 | 36° | 5.4° | 2–10° | -153dBc | 300W | 11.6dB |
| 1850–1990MHz | 3-6 | 20.3dBiavg 19.3 | 35° | 4.9° | 2–10° | -153dBc | 300W | 13.8dB |
| 1920–2180MHz | 3-6 | 20.4dBiavg 19.6 | 35° | 4.6° | 2–10° | -153dBc | 300W | 12.4dB |
| 2180–2200MHz | 3-6 | 20.3dBiavg 19.8 | 34° | 4.2° | 2–10° | -153dBc | 300W | 12.2dB |
| 2300–2400MHz | 3-6 | 20.5dBiavg 20.1 | 32° | 3.8° | 2–10° | -153dBc | 300W | 12.9dB |
| 2496–2690MHz | 3-6 | 21.2dBiavg 19.7 | 32° | 3.6° | 2–10° | -153dBc | 300W | 12.3dB |
Remote Electrical Tilt (RET), AISG 2.0
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage
- Impedance
- 50Ω
- Isolation
- >25 dB (614–960 MHz, 1695–2690 MHz)
SPEC.MECMechanical
- Dimensions
- 1830 x 636 x 224mm
- Weight
- 40.1kgexcludes mounting
- Wind load
- Front 1736 N, side 723 N at 100 mph
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 6x 4.3-10 female
- Port count
- 6
- Mounting
- MBK-01 mounting bracket included
SPEC.PRTPorts
- Ports 1-2 614–960MHz
- Ports 3-6 1695–2690MHz
- Ports 1–2614–960MHz
- Ports 3–61695–2690MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-hpa33rte6c-v1_1-250529.pdf
- Datasheet revision
- Revision 1.1, 05/29/2025
- Added
Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare