CCI

HPA65R-KE8A

Eight-foot (2.4 m), tri-band, six-port panel, 65° azimuth beamwidth, 694–960 and 1695–2690 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering parts HPA65R-KE8AA-K, HPA65R-KE8AB-K, HPA65R-KE8AC-K, HPA65R-KE8AD-K, HPA65R-KE8AE-K, HPA65R-KE8AF-K.

SPEC.COVCoverage9 band rows
600700850AWSPCSWCSBRS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
694–806MHz 1-2 15.5dBiavg 15 67° 9.7° 0–10° -153dBc 500W
790–862MHz 1-2 15.6dBiavg 15.2 70° 8.5° 0–10° -153dBc 500W
824–896MHz 1-2 15.9dBiavg 15.4 67° 8.1° 0–10° -153dBc 500W
880–960MHz 1-2 15.9dBiavg 15.6 61° 7.6° 0–10° -153dBc 500W
1695–1880MHz 3-6 18dBiavg 17.1 63° 5.6° 0–8° -153dBc 300W
1850–1990MHz 3-6 18.1dBiavg 17.5 62° 5.1° 0–8° -153dBc 300W
1920–2180MHz 3-6 18.3dBiavg 17.7 62° 4.7° 0–8° -153dBc 300W
2300–2400MHz 3-6 18dBiavg 17.2 60° 4° 0–8° -153dBc 300W
2496–2690MHz 3-6 18.1dBiavg 17.1 60° 3.8° 0–8° -153dBc 300W

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (694–960 MHz, 1695–2690 MHz)
SPEC.MECMechanical
Dimensions
2437 x 297 x 196mm
Weight
24.5kgexcludes mounting
Wind load
Front 1278 N, side 924 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
6x 4.3-10 female
Port count
6
Mounting
MBK-01 mounting bracket included
SPEC.PRTPorts6 total
  • Ports 1-2 694–960MHz
  • Ports 3-6 1695–2690MHz
1+2−3+4−5+6−
Illustrative port layout — drawn from the published 6 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–2694–960MHz
  • Ports 3–61695–2690MHz
SPEC.PATRadiation patterns9 bands
0°90°180°270°HBW 67°
Horizontal — 694–806MHz
0°90°180°270°VBW 9.7°tilt 0–10°, shown at 5°
Vertical — 694–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-hpa65rke8a-v1_2-200312.pdf
Datasheet revision
Revision 1.2, 03/12/2020
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision