CommScope

SBNHH-1D45A

6-port 45° panel, 2x 698–896 + 4x 1695–2360, 3x RET.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Public datasheet summary. The specifications on this page are taken from CommScope’s publicly available datasheet, linked above. CommScope owns its name, trademarks and specifications, which may change without notice. This site is not affiliated with, endorsed by, or sponsored by CommScope, and nothing here is proprietary to this site. Values are provided as-is for reference only — the manufacturer’s current datasheet is the authoritative source.

Obsolete — discontinued March 30, 2024 (printed on the datasheet and the andrew.com product page). No Total Input Power line is published, so max_power_w/basis/note are null (per-port ratings are still recorded per band), same as SBNHH-1D45C in batch 1. Distinct model from SBNHH-1D45C (1220 mm, 22.9 kg, 7-16 DIN, gains 15.5–20.0 dBi) vs 1D45C (2437 mm, 36.1 kg, gains 18.3+ dBi) — separate record, not a variant. Port mapping from the p.2 Array Layout: low array R1 698–896 on ports 1–2, high arrays Y1/Y2 1695–2360 on ports 3–6.

SPEC.COVCoverage6 band rows
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
698–806MHz 1-2 15.5dBi 48° 18.5° 2–18° -153dBc 350W 16dB
806–896MHz 1-2 16.2dBi 43° 16.8° 2–18° -153dBc 350W 17dB
1695–1880MHz 3-6 18.5dBi 44° 7.9° 1–9° -153dBc 350W 16dB
1850–1990MHz 3-6 19.1dBi 43.2° 7.3° 1–9° -153dBc 350W 16dB
1920–2200MHz 3-6 19.4dBi 44° 6.9° 1–9° -153dBc 350W 15dB
2300–2360MHz 3-6 20dBi 39.2° 6° 1–9° -153dBc 300W 13dB
SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
25 cross-polar, 25 inter-band
SPEC.MECMechanical
Dimensions
457 x 178 x 1220mm
Weight
22.9kgwithout mounting kit
Wind load
677.0 N at 150 km/h
Max wind speed
241 km/h (150 mph)
Connectors
6x 7-16 DIN female, bottom
Port count
6
Mounting
BSAMNT-2F
SPEC.PRTPorts6 total
  • Ports 1-2 698–896MHz
  • Ports 3-6 1695–2360MHz
1+2−3+4−5+6−
Illustrative port layout — drawn from the published 6 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–2698–896MHz
  • Ports 3–61695–2360MHz
SPEC.PATRadiation patterns6 bands
0°90°180°270°HBW 48°
Horizontal — 698–806MHz
0°90°180°270°VBW 18.5°tilt 2–18°, shown at 10°
Vertical — 698–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-20: https://www.andrew.com/globalassets/digizuite/263558-p360-sbnhh-1d45a-comprehensiveexternal.pdf
Datasheet revision
Revised March 12, 2025
Added

Specifications belong to CommScope and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary. This site is not affiliated with, endorsed by, or sponsored by CommScope. If you represent CommScope and want a correction or removal, use “Report an error” below.

Report an error in these specs

Upload a newer datasheet revision