Matsing

MS-48H180

Spherical Luneburg-lens antenna: 48 independent beams in 4 rows of 12, 1695–2690 MHz, 27.5 dBi per beam.

Antenna · Multi-Beam · Lens Multi-Beam Verified from manufacturer datasheet
Manufacturer PDF

Public datasheet summary. The specifications on this page are taken from Matsing’s publicly available datasheet, linked above. Matsing owns its name, trademarks and specifications, which may change without notice. This site is not affiliated with, endorsed by, or sponsored by Matsing, and nothing here is proprietary to this site. Values are provided as-is for reference only — the manufacturer’s current datasheet is the authoritative source.

Multi-beam spherical lens antenna: 48 beams in 4 rows of 12, per-beam specs identical except beam direction. Each beam is listed with its azimuth: rows 1 and 3 point at −52.5° to +57.5°, rows 2 and 4 are staggered 5° and point at −57.5° to +52.5° (azimuths from the mRFSafe antenna list, cross-checked against the datasheet's beam-layout diagram; the 0° line falls between the two middle beams of each row, so no beam points at 0°). Row elevations +12.9°/+4.3°/−4.3°/−12.9°. Horizontal coverage 120°. Front-to-back ratio published as a minimum ('> N dB'); recorded as the plain number. First sidelobe level <−16 dB is not a USLS value, so no USLS figure is shown.

SPEC.COVCoverage1 band row
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
1695–2690MHz 1-96 27.5dBi 6° 6° Not published -153dBc 100W

Fixed (factory set)

SPEC.BEMBeams48 beams

One antenna, many beams. Each beam is an independent narrow sector with its own ports, so a single antenna can cover several directions at once — useful on stadiums, venues and dense sites, where it replaces several separate antennas.

All beams cover 1695–2690MHz.

48 beams · azimuths -57.5° to 57.5°

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage100 W per port; total applied power ≤ 2.5 kW
Impedance
50Ω
Isolation
>28 dB (port-to-port polarization, port-to-port beam)
SPEC.MECMechanical
Dimensions
1872 x 2066 x 2072mm
Weight
251.38kg
Wind load
Front 1838 N, lateral 2053 N at 150 km/h
Connectors
96x 4.3-10 female
Port count
96
Mounting
Standard pipe mount, compatible pipe diameter 6.1–11.4 cm (2.4–4.5 in)
SPEC.PRTPorts96 total
  • Ports 1-96 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−13+14−15+16−17+18−19+20−21+22−23+24−25+26−27+28−29+30−31+32−33+34−35+36−37+38−39+40−41+42−43+44−45+46−47+48−49+50−51+52−53+54−55+56−57+58−59+60−61+62−63+64−65+66−67+68−69+70−71+72−73+74−75+76−77+78−79+80−81+82−83+84−85+86−87+88−89+90−91+92−93+94−95+96−
Illustrative port layout — drawn from the published 96 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–961695–2690MHz
SPEC.PATRadiation patterns1 band
0°90°180°270°All beams · 24 azimuths
All beams — horizontal · 24 distinct azimuths · beams sharing an azimuth draw as one lobe
0°90°180°270°HBW 6°
Horizontal — 1695–2690MHz
0°90°180°270°VBW 6°
Vertical — 1695–2690MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-16: https://www.matsing.com/wp-content/uploads/Product_Documents/MS-48H180/MS-48H180_Datasheet_V06302026.pdf
Datasheet revision
V06302026 (no revision date printed in the PDF)
Added

Specifications belong to Matsing and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary. This site is not affiliated with, endorsed by, or sponsored by Matsing. If you represent Matsing and want a correction or removal, use “Report an error” below.

Report an error in these specs

Upload a newer datasheet revision