AmphenolAntenna · Panel
CWWX063X19x00
Tri Band, 6-Port, Panel, XPOL, 65° / 67° / 67°, 696-960 | 1710-2170 | 1710-2170 MHz, 1906 mm.
600700850AWSPCS
- Peak gain
- 17.3 dBi
- Ports
- 6
- Size
- 1906 x 307.3 x 177.2 mm
Verified
Amphenol
CWWX063X25x00
Tri Band, 6-Port, Panel, XPOL, 65°, 696-960 | 1710-2170 | 1710-2170 MHz, 2508 mm.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Parent code CWWX063X25x00 (batch-7 rank 205): this is NOT a wxy fixed-tilt family - the x is the RET-actuator option in the datasheet ordering table (REV021413, p.1): M manual tilt, R RET with MDCU AISG v1.1, G RET with MDCU AISG v2.0/3GPP. The ordering table lists exactly these 3 variants; there is no MDDU/L variant in this older revision and no fixed-tilt wxy table in this PDF. Datasheet recovered from the Wayback Machine snapshot (2015-01-15) of the manufacturer PDF at http://www.amphenol-antennas.com:80/getattachment/6496ed2c-6705-4f61-be8e-02eb9ec79547/CWWX063X25x00.aspx; the live file was removed in the 2024 site redesign. F/B printed as '>25 dB' both bands; USLS printed as '< -18 dB' typical (696-960) and '< -17 dB' typical (1710-2170); recorded as plain numbers 18/17. Gain is the single figure published per sub-band (no separate average). Isolation: in-band >25 dB (696-960), >30 dB (1710-2170); between ports >30 dB. Ports assigned sequentially low to high (low 1-2, high arrays 3-6); the datasheet does not number the RF ports. Mounting kits MKS09P02/MKS09T02 ordered separately; Tri-Sector UNICELL option UNX-20-xx also listed.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 696–806MHz | 1-2 | 16.3dBi | 70° | 7.4° | 0–10° | -153dBc | 500W | 18dB |
| 806–960MHz | 1-2 | 16.8dBi | 65° | 6.9° | 0–10° | -153dBc | 500W | 18dB |
| 1710–1880MHz | 3-6 | 16.4dBi | 70° | 7° | 0–10° | -153dBc | 250W | 17dB |
| 1850–1990MHz | 3-6 | 17dBi | 67° | 6.5° | 0–10° | -153dBc | 250W | 17dB |
| 1900–2170MHz | 3-6 | 17.3dBi | 66° | 6° | 0–10° | -153dBc | 250W | 17dB |
SPEC.VARVariants
The trailing letter of the model code is the tilt-actuator option, from the datasheet ordering table (REV021413, p.1): M = Manual Electrical Tilt (MET); R = Remote Electrical Tilt (RET) with factory-installed MDCU-A0000, AISG v1.1; G = RET with factory-installed MDCU-G0000, AISG v2.0/3GPP. There is no MDDU/L variant in this revision. The RF specs are identical for all three variants.
| Variant code | What differs |
|---|---|
| CWWX063X25M00 | Manual Electrical Tilt (MET), tilt knobs at the indicators, 0-10° per band |
| CWWX063X25R00 | Remote Electrical Tilt (RET) with factory-installed MDCU-A0000 (Multi-Device Control Unit), AISG v1.1; weight 18.9 kg (manual 18.6 kg) |
| CWWX063X25G00 | Remote Electrical Tilt (RET) with factory-installed MDCU-G0000 (Multi-Device Control Unit), AISG v2.0/3GPP; weight 18.9 kg (manual 18.6 kg) |
One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage(2x) 500 W (696-960), (4x) 250 W (1710-2170); no total figure published.
- Impedance
- 50Ω
- Isolation
- >25 dB in-band (696-960), >30 dB in-band (1710-2170); >30 dB between ports
SPEC.MECMechanical
- Dimensions
- 2508 x 305 x 180mm
- Weight
- 18.6kgwithout mounting brackets
- Wind load
- Front 930 N, side 550 N at 160 km/h
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 6x 7/16-DIN female, bottom
- Port count
- 6
- Mounting
- Not published
SPEC.PRTPorts
- Ports 1-2 696–960MHz
- Ports 3-6 1710–2170MHz
- Ports 1–2696–960MHz
- Ports 3–61710–2170MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: http://www.amphenol-antennas.com:80/getattachment/6496ed2c-6705-4f61-be8e-02eb9ec79547/CWWX063X25x00.aspx
- Datasheet revision
- REV021413
- Added
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare