AmphenolAntenna · Panel
HEX456CU0000x
Tri Band, 6-Port, Panel, XPOL, 45°, 696-960 | 1695-2400 | 1695-2400 MHz, 1780 mm.
600700850AWSPCSWCS
- Peak gain
- 18.3 dBi
- Ports
- 6
- Size
- 1780 x 397 x 187 mm
Verified
Amphenol
HEX338CU0000x
Tri Band, 6-Port, Panel, XPOL, 33°, 696-960 | 1695-2400 | 1695-2400 MHz, 2410 mm.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Parent code HEX338CU0000x (batch-7 rank 210): the x is the RET-actuator option in the datasheet ordering table (REV030519NA, p.7) - M manual tilt, G RET with MDCU, L/L1/L2 RET with MDDU (different AISG port configurations). Datasheet recovered from the Wayback Machine snapshot (2019-10-23) of the manufacturer PDF at https://amphenol-antennas.com/datasheets/HEX338CU0000x.pdf; the live file was removed in the 2024 site redesign and the product page 404s. F/B printed as '>27 dB' (696-960) and '>28 dB' (1695-2400); USLS as '>18 dB' / '>17 dB' typical; recorded as plain numbers. Gain is the single figure published per sub-band (no separate average). Isolation: in-band >25 dB (696-960), >28 dB (1695-2400); between ports >30 dB. Ports assigned sequentially low to high (low 1-2, high arrays 3-6); the datasheet does not number the RF ports. Mounting kits MKS09P04/MKS09T04 ordered separately.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 696–806MHz | 1-2 | 16.8dBi | 35° | 9.9° | 0–10° | -153dBc | 500W | 18dB |
| 806–960MHz | 1-2 | 17.7dBi | 30° | 8.3° | 0–10° | -153dBc | 500W | 18dB |
| 1695–1850MHz | 3-6 | 17.9dBi | 38° | 6° | 0–10° | -153dBc | 250W | 17dB |
| 1850–1990MHz | 3-6 | 18.5dBi | 35° | 5° | 0–10° | -153dBc | 250W | 17dB |
| 2100–2180MHz | 3-6 | 18.8dBi | 30° | 4.8° | 0–10° | -153dBc | 250W | 17dB |
| 2200–2400MHz | 3-6 | 18.8dBi | 30° | 4.8° | 0–10° | -153dBc | 250W | 17dB |
SPEC.VARVariants
The trailing letter of the model code is the tilt-actuator option, from the datasheet ordering table (REV030519NA, p.7): M = Manual Electrical Tilt (MET); G = Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit); L, L1 and L2 = RET with factory-installed MDDU (Multi-Device Dual Unit), differing in AISG port configuration. The RF specs are identical for all five variants.
| Variant code | What differs |
|---|---|
| HEX338CU0000M | Manual Electrical Tilt (MET), tilt knobs at the indicators, 0–10° per band |
| HEX338CU0000G | Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit), AISG v2.0/3GPP |
| HEX338CU0000L | RET with factory-installed MDDU (Multi-Device Dual Unit); AISG Port A Red (696–960 MHz), Port B Orange/Yellow (1695–2400 MHz) |
| HEX338CU000L1 | RET with factory-installed MDDU; AISG Port A Yellow (1695–2400 MHz), Port B Orange/Red |
| HEX338CU000L2 | RET with factory-installed MDDU; AISG Port A Orange (1695–2400 MHz), Port B Yellow/Red |
One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage(2x) 500 W (696-960), (4x) 250 W (1695-2400); no total figure published.
- Impedance
- 50Ω
- Isolation
- >25 dB in-band (696-960), >28 dB in-band (1695-2400); >30 dB between ports
SPEC.MECMechanical
- Dimensions
- 2410 x 724 x 153mm
- Weight
- 49.3kgantenna only
- Wind load
- Front 2131 N, side 450 N at 160 km/h
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 6x 7/16-DIN female, bottom
- Port count
- 6
- Mounting
- Not published
SPEC.PRTPorts
- Ports 1-2 696–960MHz
- Ports 3-6 1695–2400MHz
- Ports 1–2696–960MHz
- Ports 3–61695–2400MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: https://amphenol-antennas.com/datasheets/HEX338CU0000x.pdf
- Datasheet revision
- REV030519NA
- Added
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare