AmphenolAntenna · Panel
CWX063X25x00
Dual Band, 4-Port, Panel, XPOL, 65° / 67°, 696-960 | 1710-2170 MHz, 2508 mm.
600700850AWSPCS
- Peak gain
- 17.3 dBi
- Ports
- 4
- Size
- 2508 x 305 x 180 mm
Verified
Amphenol
CWX063X19x00
Dual Band, 4-Port, Panel, XPOL, 65° / 67°, 696-960 | 1710-2170 MHz, 1906 mm.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Parent code CWX063X19x00 (batch-7 rank 207): this is NOT a wxy fixed-tilt family - the x is the RET-actuator option in the datasheet ordering table (REV030519NA, p.1): M manual tilt, G RET with MDCU, L RET with MDDU. The ordering table lists exactly these 3 variants (the extracted text shows "CWX063X19 L00" with a spacing artifact; the model is CWX063X19L00, matching the M/G pattern); there is no L1/L2 AISG-port split and no fixed-tilt wxy table in this PDF. Datasheet recovered from the Wayback Machine snapshot (2021-10-19) of the manufacturer PDF at https://amphenol-antennas.com/datasheets/CWX063X19x00.pdf; the live file was removed in the 2024 site redesign. F/B printed as '>30 dB' (696-960) and '>27 dB' (1710-2170); USLS as '>17 dB' typical both bands; recorded as plain numbers. Gain is the single figure published per sub-band (no separate average). Isolation: in-band >25 dB (696-960), >30 dB (1710-2170); between ports >30 dB. Ports assigned sequentially low to high (low 1-2, high 3-4); the datasheet does not number the RF ports. Mounting kits MKS09P02/MKS09T02 ordered separately. Same RF table as CWWX063X19x00; this is the dual-band quad-port version (one high-band array, (2x) 250 W).
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 696–806MHz | 1-2 | 14.3dBi | 70° | 11° | 0–12° | -153dBc | 500W | 17dB |
| 806–960MHz | 1-2 | 15.2dBi | 65° | 9.5° | 0–12° | -153dBc | 500W | 17dB |
| 1710–1880MHz | 3-4 | 16.4dBi | 70° | 7° | 0–10° | -153dBc | 250W | 17dB |
| 1850–1990MHz | 3-4 | 17dBi | 67° | 6.5° | 0–10° | -153dBc | 250W | 17dB |
| 1900–2170MHz | 3-4 | 17.3dBi | 66° | 6° | 0–10° | -153dBc | 250W | 17dB |
SPEC.VARVariants
The trailing letter of the model code is the tilt-actuator option, from the datasheet ordering table (REV030519NA, p.1): M = Manual Electrical Tilt (MET); G = Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit); L = RET with factory-installed MDDU (Multi-Device Dual Unit). The RF specs are identical for all three variants.
| Variant code | What differs |
|---|---|
| CWX063X19M00 | Manual Electrical Tilt (MET), tilt knobs at the indicators, low band 0-12°, high band 0-10° |
| CWX063X19G00 | Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit), AISG v2.0/3GPP; weight 15.3 kg (manual 15.0 kg) |
| CWX063X19L00 | Remote Electrical Tilt (RET) with factory-installed MDDU (Multi-Device Dual Unit), AISG v2.0/3GPP, two separate inputs for independent control of each band (antenna sharing); weight 15.3 kg (manual 15.0 kg) |
One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage(2x) 500 W (696-960), (2x) 250 W (1710-2170); no total figure published.
- Impedance
- 50Ω
- Isolation
- >25 dB in-band (696-960), >30 dB in-band (1710-2170); >30 dB between ports
SPEC.MECMechanical
- Dimensions
- 1906 x 307.3 x 177.2mm
- Weight
- 15kgwithout mounting brackets
- Wind load
- Front 707 N, side 419 N at 160 km/h
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 4x 7/16-DIN female, bottom
- Port count
- 4
- Mounting
- Not published
SPEC.PRTPorts
- Ports 1-2 696–960MHz
- Ports 3-4 1710–2170MHz
- Ports 1–2696–960MHz
- Ports 3–41710–2170MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: https://amphenol-antennas.com/datasheets/CWX063X19x00.pdf
- Datasheet revision
- REV030519NA
- Added
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare