CWX063X19x00
Dual Band, 4-Port, Panel, XPOL, 65° / 67°, 696-960 | 1710-2170 MHz, 1906 mm.
- Peak gain
- 17.3 dBi
- Ports
- 4
- Size
- 1906 x 307.3 x 177.2 mm
Amphenol
Dual Band, 4-Port, Panel, XPOL, 45° / 45°, 696-896 | 1695-2180 MHz, 2107 mm.
Display units
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Parent code QUAD457CW000x (batch-7 rank 232): the x is the RET-actuator option in the datasheet ordering table (REV030519NA, p.1) - M manual tilt, G RET AISG v2.0/3GPP with MDCU, L RET AISG v2.0/3GPP with MDDU. Datasheet recovered from the Wayback Machine snapshot (2022-01-28) of the manufacturer PDF at https://amphenol-antennas.com/datasheets/QUAD457CW000x.pdf; the live file was removed in the 2024 site redesign. F/B printed as '>30 dB' both bands; USLS as '15 dB Typical' (696-896) and '16 dB' (1695-2180); recorded as plain numbers. Gain is the single figure published per sub-band (no separate average). Isolation: in-band >25 dB, between ports >30 dB. Ports assigned sequentially low to high (low 1-2, high 3-4); the datasheet does not number the RF ports. Mounting kits MKS09P03/MKS09T03 ordered separately.
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 696–806MHz | 1-2 | 16dBi | 47° | 10.5° | 0–12° | -153dBc | 500W | 15dB |
| 806–896MHz | 1-2 | 17dBi | 45° | 9° | 0–12° | -153dBc | 500W | 15dB |
| 1695–1850MHz | 3-4 | 18.5dBi | 48° | 6° | 0–8° | -153dBc | 250W | 16dB |
| 1850–1990MHz | 3-4 | 18.8dBi | 48° | 5.5° | 0–8° | -153dBc | 250W | 16dB |
| 2100–2180MHz | 3-4 | 19.5dBi | 46° | 5° | 0–8° | -153dBc | 250W | 16dB |
The trailing letter of the model code is the tilt-actuator option, from the datasheet ordering table (REV030519NA, p.1): M = Manual Electrical Tilt (MET); G = Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit); L = RET with factory-installed MDDU (Multi-Device Dual Unit). The RF specs are identical for all three variants.
| Variant code | What differs |
|---|---|
| QUAD457CW000M | Manual Electrical Tilt (MET), tilt knobs at the indicators, low band 0-12°, high band 0-8° |
| QUAD457CW000G | Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit), AISG v2.0/3GPP; weight 27.5 kg (manual 27.2 kg) |
| QUAD457CW000L | Remote Electrical Tilt (RET) with factory-installed MDDU (Multi-Device Dual Unit), AISG v2.0/3GPP; weight 27.5 kg (manual 27.2 kg) |
One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.