AmphenolAntenna · Panel
CWX063X19x00
Dual Band, 4-Port, Panel, XPOL, 65° / 67°, 696-960 | 1710-2170 MHz, 1906 mm.
600700850AWSPCS
- Peak gain
- 17.3 dBi
- Ports
- 4
- Size
- 1906 x 307.3 x 177.2 mm
Verified
Amphenol
HTXCW451720x000
Dual Band, 4-Port, Panel, XPOL, 45° / 45°, 696-896 | 1710-2170 MHz, 2107 mm.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF Product page
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Parent code HTXCW451720x000 (batch-7 rank 220): the x is the RET-actuator option in the datasheet ordering table (REV070814O, p.1) - M manual tilt, R RET AISG v1.1 with MDCU-A0000, R...G RET AISG v2.0/3GPP with MDCU-G0000 (model HTXCW451720R000G, x=R plus a trailing G). Datasheet recovered from the Wayback Machine snapshot (2016-01-15) of the manufacturer PDF at http://www.amphenol-antennas.com/getattachment/9bad7899-85a2-4aae-9e57-4ced20bd4e93/Products/Antennas/Panel-Antennas/HTXCW451720x000.aspx; the live file was removed in the 2024 site redesign. F/B printed as '>30 dB' both bands; USLS as '15 dB typical' (696-896) and '16 dB' (1710-2170); recorded as plain numbers. Gain is the single figure published per sub-band (no separate average). Isolation: intra-band >25 dB, inter-band >30 dB. Ports assigned sequentially low to high (low 1-2, high 3-4); the datasheet does not number the RF ports. Mounting kits MKS09P03/MKS09T03 ordered separately.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port | USLS, dB |
|---|---|---|---|---|---|---|---|---|
| 696–806MHz | 1-2 | 16dBi | 47° | 10.5° | 0–12° | -153dBc | 500W | 15dB |
| 806–896MHz | 1-2 | 17dBi | 45° | 9° | 0–12° | -153dBc | 500W | 15dB |
| 1710–1880MHz | 3-4 | 18.5dBi | 48° | 6° | 0–8° | -153dBc | 250W | 16dB |
| 1850–1990MHz | 3-4 | 18.8dBi | 48° | 5.5° | 0–8° | -153dBc | 250W | 16dB |
| 1920–2170MHz | 3-4 | 19.5dBi | 46° | 5° | 0–8° | -153dBc | 250W | 16dB |
SPEC.VARVariants
In the model code, x is the tilt-actuator option, from the datasheet ordering table (REV070814O, p.1): M = Manual Electrical Tilt (MET); R = Remote Electrical Tilt (RET) with factory-installed MDCU-A0000, AISG v1.1; the AISG v2.0/3GPP variant is HTXCW451720R000G (x = R plus a trailing G), with factory-installed MDCU-G0000. The RF specs are identical for all three variants.
| Variant code | What differs |
|---|---|
| HTXCW451720M000 | Manual Electrical Tilt (MET), tilt knobs at the indicators, low band 0-12°, high band 0-8° |
| HTXCW451720R000 | Remote Electrical Tilt (RET) with factory-installed MDCU-A0000 (Multi-Device Control Unit), AISG v1.1; weight 27.5 kg (manual 27.2 kg) |
| HTXCW451720R000G | Remote Electrical Tilt (RET) with factory-installed MDCU-G0000 (Multi-Device Control Unit), AISG v2.0/3GPP; weight 27.5 kg (manual 27.2 kg) |
One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage500 W (696-896), 250 W (1710-2170); no total figure published.
- Impedance
- 50Ω
- Isolation
- >25 dB intra-band; >30 dB inter-band
SPEC.MECMechanical
- Dimensions
- 2107 x 520 x 177mm
- Weight
- 27.2kgwithout mounting brackets
- Wind load
- Front 1333 N, side 455 N at 160 km/h
- Max wind speed
- >241 km/h (>150 mph)
- Connectors
- 4x 7/16-DIN (Extended) female, bottom
- Port count
- 4
- Mounting
- Not published
SPEC.PRTPorts
- Ports 1-2 696–896MHz
- Ports 3-4 1710–2170MHz
- Ports 1–2696–896MHz
- Ports 3–41710–2170MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: http://www.amphenol-antennas.com/getattachment/9bad7899-85a2-4aae-9e57-4ced20bd4e93/Products/Antennas/Panel-Antennas/HTXCW451720x000.aspx
- Datasheet revision
- REV070814O
- Added
Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare