CCIAntenna · Panel
SCA65F-KEH1B
One-foot (498 mm), tri-band, twelve-port small-cell panel, 65° azimuth beamwidth, 698–960, 1695–2690 and 3300–4200 MHz.
700850AWSPCSWCSBRSDoDCBRSC-Band
- Peak gain
- 11.7 dBi
- Ports
- 12
- Size
- 498 x 363 x 200 mm
Verified
CCI
TPA45R-BW4B
Four-foot (136 cm), dual-band, twelve-port panel, 45° azimuth beamwidth, 698–896 and 1695–2180 MHz.
Antenna · Panel
Verified from manufacturer datasheet
Manufacturer PDF
Display units
Frequency
Gain
Power
Length
Weight
Converted for display only. Wind speed, beamwidth, tilt, PIM, VSWR and impedance are shown as published.
Addition: not in the sheet and not in the library; found by web search while resolving TPA45R-BU4B (same DualBand LEGO family). Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA45R-BW4BA-K.
SPEC.COVCoverage
| Band, MHz | Ports | Gain | Horizontal BW | Vertical BW | Electrical tilt | PIM, dBc | Power / port |
|---|---|---|---|---|---|---|---|
| 698–806MHz | 1-4 | 14.6dBiavg 13.8 | 42° | 15.5° | 0–12° | -153dBc | 500W |
| 824–896MHz | 1-4 | 15.4dBiavg 14.7 | 37° | 13.5° | 0–12° | -153dBc | 500W |
| 1695–1880MHz | 5-12 | 17.3dBiavg 15.9 | 49° | 8.1° | 0–12° | -153dBc | 300W |
| 1850–1990MHz | 5-12 | 17.7dBiavg 16.6 | 46° | 7.5° | 0–12° | -153dBc | 300W |
| 1920–2180MHz | 5-12 | 18.4dBiavg 17 | 45° | 7.1° | 0–12° | -153dBc | 300W |
Remote Electrical Tilt (RET), AISG 2.0
SPEC.ELEElectrical
- Polarization
- ±45°
- VSWR
- 1.5: 1
- PIM, 3rd order
- By band, see Coverage
- Max input power
- By band, see Coverage
- Impedance
- 50Ω
- Isolation
- >25 dB (698–896 MHz, 1695–2180 MHz)
SPEC.MECMechanical
- Dimensions
- 1363 x 606 x 214mm
- Weight
- 29.5kgexcludes mounting
- Wind load
- Front 823 N, side 215 N at 100 mph
- Max wind speed
- 241 km/h (150 mph)
- Connectors
- 12x 4.3-10 female
- Port count
- 12
- Mounting
- MBK-01 mounting bracket included
SPEC.PRTPorts
- Ports 1-4 698–896MHz
- Ports 5-12 1695–2180MHz
- Ports 1–4698–896MHz
- Ports 5–121695–2180MHz
SPEC.PATRadiation patterns
Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.
CALC.EIRPUse this gain
Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.
EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →
SOURCESource and corrections
- Source
- Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa45rbw4b-v1_0-240717.pdf
- Datasheet revision
- Revision 1.0, 07/17/2024
- Added
Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.
Report an error in these specs
Compare
Compare