CCI

TPA65R-TE6C

Six-foot (1.8 m), tri-band, twelve-port panel, 65° azimuth beamwidth, 614–896 and 1695–2690 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering parts TPA65R-TE6CA-K, TPA65R-TE6CB-K.

SPEC.COVCoverage8 band rows
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
614–698MHz 1-4 14.7dBiavg 13.7 71° 14.6° 2–12° -153dBc 500W 14.7dB
698–806MHz 1-4 15dBiavg 14.4 61° 12.8° 2–12° -153dBc 500W 15dB
824–896MHz 1-4 14.9dBiavg 14.2 56° 11.3° 2–12° -153dBc 500W 15.1dB
1695–1880MHz 5-12 18.2dBiavg 17.2 61° 5.6° 0–8° -153dBc 300W 11.6dB
1850–1990MHz 5-12 18.4dBiavg 17.6 58° 5° 0–8° -153dBc 300W 12.7dB
1920–2180MHz 5-12 18.7dBiavg 17.7 57° 4.7° 0–8° -153dBc 300W 13.9dB
2300–2400MHz 5-12 18.5dBiavg 17.4 59° 4.1° 0–8° -153dBc 300W 15.7dB
2496–2690MHz 5-12 18.1dBiavg 17.1 59° 3.9° 0–8° -153dBc 300W 16dB

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (614–896 MHz, 1695–2690 MHz)
SPEC.MECMechanical
Dimensions
1808 x 648 x 205mm
Weight
39.3kgexcludes mounting
Wind load
Front 1742 N, side 664 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-01 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 614–896MHz
  • Ports 5-12 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4614–896MHz
  • Ports 5–121695–2690MHz
SPEC.PATRadiation patterns8 bands
0°90°180°270°HBW 71°
Horizontal — 614–698MHz
0°90°180°270°VBW 14.6°tilt 2–12°, shown at 7°
Vertical — 614–698MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa65rte6c-v1_1-191015.pdf
Datasheet revision
Revision 1.1, 10/15/2019
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision