CCI

TPA65R-KE4B

Four-foot (1.2 m), tri-band, twelve-port panel, 65° azimuth beamwidth, 694–960 and 1695–2690 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA65R-KE4BA-K.

SPEC.COVCoverage9 band rows
600700850AWSPCSWCSBRS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
694–806MHz 1-4 13.9dBiavg 13 63° 20.2° 2–16° -153dBc 500W 16.2dB
790–862MHz 1-4 13.9dBiavg 13.4 59° 18.5° 2–16° -153dBc 500W 16.3dB
824–896MHz 1-4 13.9dBiavg 13.4 59° 17.6° 2–16° -153dBc 500W 16.8dB
880–960MHz 1-4 13.9dBiavg 13.4 58° 16.5° 2–16° -153dBc 500W 16.3dB
1695–1880MHz 5-12 16.8dBiavg 16 62° 8.1° 2–10° -153dBc 300W 13.5dB
1850–1990MHz 5-12 17dBiavg 16.3 64° 7.3° 2–10° -153dBc 300W 13.9dB
1920–2180MHz 5-12 17.2dBiavg 16.5 63° 6.8° 2–10° -153dBc 300W 13.4dB
2300–2400MHz 5-12 16.9dBiavg 16.3 64° 6° 2–10° -153dBc 300W 12.1dB
2496–2690MHz 5-12 17.2dBiavg 15.8 66° 5.7° 2–10° -153dBc 300W 11.4dB

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (694–960 MHz, 1695–2690 MHz)
SPEC.MECMechanical
Dimensions
1219 x 648 x 194mm
Weight
28kgexcludes mounting
Wind load
Front 1162 N, side 397 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-02 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 694–960MHz
  • Ports 5-12 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4694–960MHz
  • Ports 5–121695–2690MHz
SPEC.PATRadiation patterns9 bands
0°90°180°270°HBW 63°
Horizontal — 694–806MHz
0°90°180°270°VBW 20.2°tilt 2–16°, shown at 9°
Vertical — 694–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa65rke4b-v1_0-171013.pdf
Datasheet revision
Revision 1.0, 10/13/2017
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision