CCI

TPA45R-TU8B

Eight-foot (2.3 m), dual-band, twelve-port panel, 45° azimuth beamwidth, 617–896 and 1695–2400 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA45R-TU8BB-K.

SPEC.COVCoverage7 band rows
600700850AWSPCSWCS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
617–698MHz 1-4 16.2dBiavg 15.3 50° 9.9° 0–8° -153dBc 300W 13.1dB
698–806MHz 1-4 16.9dBiavg 16.1 47° 8.8° 0–8° -153dBc 300W 15dB
824–896MHz 1-4 17.4dBiavg 16.8 40° 7.8° 0–8° -153dBc 300W 14.6dB
1695–1880MHz 5-12 19.5dBiavg 18.4 50° 4.4° 0–8° -153dBc 250W 16.7dB
1850–1990MHz 5-12 19.8dBiavg 18.8 49° 4.1° 0–8° -153dBc 250W 16dB
1920–2180MHz 5-12 20.5dBiavg 19.2 49° 3.9° 0–8° -153dBc 250W 14.9dB
2300–2400MHz 5-12 20.9dBiavg 19.8 45° 3.3° 0–8° -153dBc 200W 13.9dB

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (617–896 MHz, 1695–2400 MHz)
SPEC.MECMechanical
Dimensions
2304 x 606 x 229mm
Weight
46.5kgexcludes mounting
Wind load
Front 1362 N, side 462 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-16 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 617–896MHz
  • Ports 5-12 1695–2400MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4617–896MHz
  • Ports 5–121695–2400MHz
SPEC.PATRadiation patterns7 bands
0°90°180°270°HBW 50°
Horizontal — 617–698MHz
0°90°180°270°VBW 9.9°tilt 0–8°, shown at 4°
Vertical — 617–698MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa45rtu8b-v1_0-260515.pdf
Datasheet revision
Revision 1.0, 05/15/2026
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision