CCI

TPA65R-BU6A

Six-foot (1.8 m), multiband, twelve-port panel, 65° azimuth beamwidth, 698–896 and 1695–2400 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA65R-BU6AA-K. EOL September 29, 2025 (EOL-250929-02); replacement TPA65R-BU6Dv2B-K.

SPEC.COVCoverage6 band rows
700850AWSPCSWCS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
698–806MHz 1-4 15dBiavg 14.2 62° 12.9° 2–12° -150dBc 500W
824–896MHz 1-4 15.3dBiavg 14.6 57° 11.4° 2–12° -150dBc 500W
1695–1880MHz 5-12 18dBiavg 17.1 63° 5.6° 0–8° -150dBc 300W
1850–1990MHz 5-12 18.3dBiavg 17.4 63° 5.1° 0–8° -150dBc 300W
1920–2180MHz 5-12 18.3dBiavg 17.6 63° 4.7° 0–8° -150dBc 300W
2300–2400MHz 5-12 18.1dBiavg 17.2 61° 4° 0–8° -150dBc 300W

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (698–896 MHz, 1695–2400 MHz)
SPEC.MECMechanical
Dimensions
1807 x 648 x 194mm
Weight
36.1kgexcludes mounting and RET
Wind load
Front 1741 N, side 635 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-01 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 698–896MHz
  • Ports 5-12 1695–2400MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4698–896MHz
  • Ports 5–121695–2400MHz
SPEC.PATRadiation patterns6 bands
0°90°180°270°HBW 62°
Horizontal — 698–806MHz
0°90°180°270°VBW 12.9°tilt 2–12°, shown at 7°
Vertical — 698–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/images/Images/discprod/Antenna_s-ds-tpa65rbu6a-v1_0-170213.pdf
Datasheet revision
Revision 1.0, 02/13/2017
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision