CCI

TPA65R-BU6Dv2

Six-foot (1.8 m), DualBand, twelve-port panel, 65° azimuth beamwidth, 698–896 and 1695–2400 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA65R-BU6Dv2B-K. New LB dipole and internally daisy-chained Type 17 RETs (Product Updates 1–2). ADDITION — not in the sheet; found during Batch 6 research as the replacement for TPA65R-BU6D.

SPEC.COVCoverage6 band rows
700850AWSPCSWCS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
698–806MHz 1-4 14.4dBiavg 13.6 72° 12.7° 2–12° -153dBc 500W 14.9dB
824–896MHz 1-4 15.3dBiavg 14.4 61° 11.1° 2–12° -153dBc 500W 16.6dB
1695–1880MHz 5-12 17.6dBiavg 16.4 69° 5.6° 0–8° -153dBc 300W 12.3dB
1850–1990MHz 5-12 18.2dBiavg 17.1 63° 5.1° 0–8° -153dBc 300W 12.9dB
1920–2180MHz 5-12 18.6dBiavg 17.6 61° 4.8° 0–8° -153dBc 300W 11.9dB
2300–2400MHz 5-12 18.6dBiavg 17.7 56° 4.1° 0–8° -153dBc 300W 14.3dB

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (698–896 MHz, 1695–2400 MHz)
SPEC.MECMechanical
Dimensions
1808 x 525 x 197mm
Weight
31kgexcludes mounting
Wind load
Front 1085 N, side 241 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-16 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 698–896MHz
  • Ports 5-12 1695–2400MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4698–896MHz
  • Ports 5–121695–2400MHz
SPEC.PATRadiation patterns6 bands
0°90°180°270°HBW 72°
Horizontal — 698–806MHz
0°90°180°270°VBW 12.7°tilt 2–12°, shown at 7°
Vertical — 698–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa65rbu6dv2-v1_1-230320.pdf
Datasheet revision
Revision 1.1, 03/20/2023
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision