Amphenol

TWIN658CU000x

Twin Dual Band, 8-Port, Panel, (2x) XPOL, 65°, 696-960 | 696-960 | 1695-2400 | 1695-2400 MHz, 2462 mm.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Parent code TWIN658CU000x (batch-7 rank 233): the x is the RET-actuator option in the datasheet ordering table (REV070518NA, p.1) - M manual tilt, G RET AISG v2.0/3GPP with MDCU, L RET AISG v2.0/3GPP with MDDU (no AISG v1.1 option for this family). Datasheet recovered from the Wayback Machine snapshot (2020-10-21) of the manufacturer PDF at https://amphenol-antennas.com/datasheets/TWIN658CU000x.pdf; the live file was removed in the 2024 site redesign. Twin dual band, 8-port: two low-band arrays R1 (ports 1-2) and R2 (ports 3-4), two high-band arrays Y1 (ports 5-6) and Y2 (ports 7-8); each array has its own NGMN-P-BASTA v9.6 electrical table, so each array gets its own band rows (12 per record). Gain: gain_dbi is the max across 0/5/10 deg tilts, gain_avg_dbi is the published "Over all Tilts" mean. HBW/VBW are the NGMN mean values (tolerances in the PDF, e.g. R1 696-806 HBW 79.9 deg +/- 6.8 deg). F/B is "Total Power, +/-30 deg" and USLS is "Peak to 20 deg", both printed with '>' and recorded as plain numbers. Isolation: inter/intra-band >23 dB (696-960), >25 dB (1695-2400). Band max_power_w is the published Maximum Effective Power Per Port (500 W low, 250 W high). Mounting kit 36210008 (3-Point Mounting & Downtilt Bracket Kit) delivered as standard.

SPEC.COVCoverage12 band rows
600700850AWSPCSWCS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port USLS, dB
696–806MHz 1-2 14.7dBiavg 14.6 79.9° 10° 0–10° -153dBc 500W 14dB
806–960MHz 1-2 15.5dBiavg 15.4 68° 8.5° 0–10° -153dBc 500W 13dB
696–806MHz 3-4 14.9dBiavg 14.8 78° 10° 0–10° -153dBc 500W 14.2dB
806–960MHz 3-4 15.6dBiavg 15.5 67.6° 8.5° 0–10° -153dBc 500W 13.5dB
1695–1850MHz 5-6 15.9dBiavg 15.9 61.4° 5.9° 0–10° -153dBc 250W 14dB
1850–1990MHz 5-6 16.4dBiavg 16.2 59.8° 5.6° 0–10° -153dBc 250W 13dB
2100–2180MHz 5-6 16.6dBiavg 16.1 55.2° 5.5° 0–10° -153dBc 250W 12.1dB
2200–2400MHz 5-6 15.5dBiavg 15.2 50.3° 4.6° 0–10° -153dBc 250W 8.8dB
1695–1850MHz 7-8 15.7dBiavg 15.7 61.2° 5.9° 0–10° -153dBc 250W 14.1dB
1850–1990MHz 7-8 16.3dBiavg 16.1 60.4° 5.6° 0–10° -153dBc 250W 13.6dB
2100–2180MHz 7-8 16.5dBiavg 16 55.6° 5.4° 0–10° -153dBc 250W 12.7dB
2200–2400MHz 7-8 15.6dBiavg 15.3 50.9° 4.6° 0–10° -153dBc 250W 9.7dB
SPEC.VARVariants3 variants

The trailing letter of the model code is the tilt-actuator option, from the datasheet ordering table (REV070518NA, p.1): M = Manual Electrical Tilt (MET); G = Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit); L = RET with factory-installed MDDU (Multi-Device Dual Unit). There is no AISG v1.1 option for this family. The RF specs are identical for all three variants.

Variant codeWhat differs
TWIN658CU000M Manual Electrical Tilt (MET), tilt knobs at the indicators, 0-10° per band
TWIN658CU000G Remote Electrical Tilt (RET) with factory-installed MDCU (Multi-Device Control Unit), AISG v2.0/3GPP
TWIN658CU000L Remote Electrical Tilt (RET) with factory-installed MDDU (Multi-Device Dual Unit), AISG v2.0/3GPP

One antenna, one page — these are ordering options of this model, not separate models. The specs on this page apply to every variant unless the table says otherwise.

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage500 W max effective power per port (696-960), 250 W per port (1695-2400); no total figure published.
Impedance
50Ω
Isolation
>23 dB inter/intra-band (696-960), >25 dB inter/intra-band (1695-2400)
SPEC.MECMechanical
Dimensions
2462 x 520 x 178mm
Weight
37kgantenna only
Wind load
Front 1717 N, rear 535 N at 160 km/h
Max wind speed
241 km/h (150 mph)
Connectors
8x 7/16-DIN female, bottom
Port count
8
Mounting
36210008 3-Point Mounting & Downtilt Bracket Kit (delivered as standard)
SPEC.PRTPorts8 total
  • Ports 1-2 696–960MHz
  • Ports 3-4 696–960MHz
  • Ports 5-6 1695–2400MHz
  • Ports 7-8 1695–2400MHz
1+2−3+4−5+6−7+8−
Illustrative port layout — drawn from the published 8 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–2696–960MHz
  • Ports 3–4696–960MHz
  • Ports 5–61695–2400MHz
  • Ports 7–81695–2400MHz
SPEC.PATRadiation patterns12 bands
0°90°180°270°HBW 79.9°
Horizontal — 696–806MHz
0°90°180°270°VBW 10°tilt 0–10°, shown at 5°
Vertical — 696–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All Amphenol models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://amphenol-antennas.com/datasheets/TWIN658CU000x.pdf
Datasheet revision
REV070518NA
Added

Specifications belong to Amphenol and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision