CCI

TPA65R-KE4D

Four-foot (1.2 m), tri-band, twelve-port panel, 65° azimuth beamwidth, 698–960 and 1695–2690 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA65R-KE4DA-K.

SPEC.COVCoverage9 band rows
700850AWSPCSWCSBRS
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
698–806MHz 1-4 13.1dBiavg 12.2 71° 20° 2–16° -153dBc 500W
790–862MHz 1-4 13.5dBiavg 12.5 65° 18.5° 2–16° -153dBc 500W
824–896MHz 1-4 13.9dBiavg 12.7 60° 17.8° 2–16° -153dBc 500W
880–960MHz 1-4 14dBiavg 13 55° 16.7° 2–16° -153dBc 500W
1695–1880MHz 5-12 16.5dBiavg 15.3 69° 8.4° 2–10° -153dBc 300W
1850–1990MHz 5-12 17dBiavg 16 66° 7.4° 2–10° -153dBc 300W
1920–2180MHz 5-12 17.1dBiavg 16.2 66° 6.9° 2–10° -153dBc 300W
2300–2400MHz 5-12 17.2dBiavg 16.4 59° 6° 2–10° -153dBc 300W
2496–2690MHz 5-12 17.1dBiavg 16 63° 5.5° 2–10° -153dBc 300W

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (698–960 MHz, 1695–2690 MHz)
SPEC.MECMechanical
Dimensions
1220 x 525 x 197mm
Weight
23.7kgexcludes mounting
Wind load
Front 943 N, side 402 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-02 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 698–960MHz
  • Ports 5-12 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4698–960MHz
  • Ports 5–121695–2690MHz
SPEC.PATRadiation patterns9 bands
0°90°180°270°HBW 71°
Horizontal — 698–806MHz
0°90°180°270°VBW 20°tilt 2–16°, shown at 9°
Vertical — 698–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

All CCI models
SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa65rke4d-v1_3-210404.pdf
Datasheet revision
Revision 1.3, 04/04/2021
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision