CCI

TPA65R-KE6D

Six-foot (1.8 m), tri-band, twelve-port panel, 65° azimuth beamwidth, 698–960 and 1695–2690 MHz.

Antenna · Panel Verified from manufacturer datasheet
Manufacturer PDF Product page

Front-to-back ratio published as a minimum ('> N dB') in the datasheet; recorded as the plain number. Ordering part TPA65R-KE6DA-K.

SPEC.COVCoverage9 band rows
Band, MHz Ports GainHorizontal BWVertical BWElectrical tilt PIM, dBc Power / port
698–806MHz 1-4 14.5dBiavg 13.6 73° 12.8° 2–12° -153dBc 500W
790–862MHz 1-4 14.8dBiavg 14.1 67° 11.6° 2–12° -153dBc 500W
824–896MHz 1-4 15.1dBiavg 14.4 63° 11.1° 2–12° -153dBc 500W
880–960MHz 1-4 15.2dBiavg 14.7 56° 10.4° 2–12° -153dBc 500W
1695–1880MHz 5-12 17.8dBiavg 16.6 70° 5.7° 0–8° -153dBc 300W
1850–1990MHz 5-12 18.1dBiavg 17 66° 5.2° 0–8° -153dBc 300W
1920–2180MHz 5-12 18.4dBiavg 17.3 66° 4.8° 0–8° -153dBc 300W
2300–2400MHz 5-12 18dBiavg 16.9 60° 4° 0–8° -153dBc 300W
2496–2690MHz 5-12 18.4dBiavg 17.6 57° 3.7° 0–8° -153dBc 300W

Remote Electrical Tilt (RET), AISG 2.0

SPEC.ELEElectrical
Polarization
±45°
VSWR
1.5: 1
PIM, 3rd order
By band, see Coverage
Max input power
By band, see Coverage
Impedance
50Ω
Isolation
>25 dB (698–960 MHz, 1695–2690 MHz)
SPEC.MECMechanical
Dimensions
1808 x 525 x 197mm
Weight
31kgexcludes mounting
Wind load
Front 1446 N, side 642 N at 100 mph
Max wind speed
241 km/h (150 mph)
Connectors
12x 4.3-10 female
Port count
12
Mounting
MBK-01 mounting bracket included
SPEC.PRTPorts12 total
  • Ports 1-4 698–960MHz
  • Ports 5-12 1695–2690MHz
1+2−3+4−5+6−7+8−9+10−11+12−
Illustrative port layout — drawn from the published 12 ports and ±45° polarization. The arrangement is schematic; the exact positions are in the manufacturer PDF.
  • Ports 1–4698–960MHz
  • Ports 5–121695–2690MHz
SPEC.PATRadiation patterns9 bands
0°90°180°270°HBW 73°
Horizontal — 698–806MHz
0°90°180°270°VBW 12.8°tilt 2–12°, shown at 7°
Vertical — 698–806MHz

Illustrative patterns — the main lobe is drawn on a 0 to −30 dB scale so its −3 dB width matches the published beamwidth. The back lobe, where shown, sits at the published front-to-back ratio. Sidelobes are not drawn. The exact plots are in the manufacturer PDF.

CALC.EIRPUse this gainEIRP / ERP

Pick a band. The gain comes from the table above. Add your transmit power and feed loss to get EIRP.

EIRP — Turn on JavaScript, or use the calculator link.

EIRP = TX power − loss + gain (dBi). ERP = EIRP − 2.15 dB. Open the full EIRP calculator →

SOURCESource and corrections
Source
Manufacturer datasheet PDF, read 2026-11-12: https://cciproducts.com/DsPdf/ds-tpa65rke6d-v1_5-210702.pdf
Datasheet revision
Revision 1.5, 07/02/2021
Added

Specifications belong to CCI and can change without notice. The manufacturer’s current datasheet is the authority; check it before you sign a report. Everything on this page is public data — the same datasheet anyone can find with a Google search. Nothing here is proprietary.

Report an error in these specs

Upload a newer datasheet revision